QuadroCS Manual II: Administrator's Guide
Administrator's Menus
Quadro
CS
(SW Version 3.0.x)
22
5. Zero Out Service
Enable Zero Out
checkbox enables
Zero Out Service
which provides a possibility to caller that has reached the Conference Server’s Auto
Attendant Zero Out menu (see Call Codes) to accelerate the automatic redirection feature. Entering Zero Out menu will automatically redirect call to
the destination defined in the
Redirect Address
text field. If
Zero Out Service
is disabled, corresponding menu will be hidden in the Auto Attendant.
Add
opens the
Conference Wizard
used to guide the user through the basic settings to create a new conference. The
Conference Wizard
consists
of two pages – for providing general conference properties and SIP registration settings. The following settings are entered into the first page of the
Conference Wizard
:
Conference ID
is used to enter a unique ID for the call
conference. This ID will be also used in Conference Server's
Auto Attendant to reach the local conference. Digits allowed
only. System prevents adding a conference starting with 0 digit.
Subject
is an optional parameter where a brief subject of the
conference can be entered.
Description
is an optional parameter used to insert additional
information about the conference.
Moderator Password
can be entered to provide moderator
access to the conference. It has to be entered twice for
confirmation. The password inserted here will be used by the
moderator to join the conference. The moderator can dial codes
during the active conference as well as access conference
specific GUI pages to control the conference (view/change
conference properties, activate/deactivate it, start/stop/resume
record, view conference statistics).
Participant Password
can be entered to require a password for
participant access to the conference. It has to be entered twice
for confirmation. The password entered here should be used by
the participant to join the conference. The participant can
participate in the conference only according to the rights
(speaker or listener) granted by the moderator. The participant
also can access the conference specific GUI to view the
conference properties and the other participants.
Fig. II-33: Conference Wizard - page1
Max. Duration
sets the conference to be limited to a maximum duration (in minutes). Leave the field empty for unlimited conference duration.
Conference Recording Space
is used to select the percentage of total QuadroCS's memory space that can be used for recording of this
conference.
Enable Routing Mode
checkbox enables direct access to the Quadro’s internal routing tables when dialing out to a participant during a conference.
When this checkbox is selected, any dialed number will be parsed through
Call Routing Table.
Leave Active
checkbox will keep conference active, even if all participants have left it.
The second page of the
Conference Wizard
is where the
SIP registration settings are configured:
Registration User Name
text field requires a user name
for conference registration on the SIP server. The
registration user name needs to be unique on the SIP
server and is used to reach the conference over the SIP
network.
Registration
Password
is the password for the
registration on the SIP server. It must be confirmed in the
Confirm Registration
Password
text field.
Registration SIP Server
indicates the host address of the
SIP server. The field is not limited regarding symbol usage
and length. It can be either an IP address (ex:
192.168.0.26) or a host address (ex: sip.epygi.com).
Registration
SIP Port
indicates the host port number to
connect to the SIP server. The SIP server port may only
contain digit values. If the SIP server port is not specified,
the QuadroCS will access the SIP server through the
default port of 5060.
Registration on SIP Server
enables the conference ID to
be registered on the SIP server.
Fig. II-34: Conference Wizard - page2
SIP Outbound Proxy Settings
are optional settings used for the QuadroCS’s connection to the SIP server. The SIP Outbound proxy is a SIP server
where all the SIP requests and other SIP messages are transferred. Some SIP servers use outbound proxy servers to avoid the restrictions of NAT.
SIP Outbound Settings
are provided by the SIP server provider and are used by QuadroCS to reach the selected SIP server. If an Outbound proxy
is specified for a conference, all outbound SIP calls are made through that outbound proxy.
SIP Outbound Proxy address
requires the IP address or the host name of the outbound proxy.
SIP Outbound Proxy Port
requires the port number on which QuadroCS may reach the outbound proxy.
SIP
UserID
requires a user ID to for authentication on the SIP server. The UserID may be requested by some SIP servers. If not required,
the field should be left blank.
