Epson TM-T85, Operator'S Manual

Page: 89 / 115

Commands 5-31
[Notes] • When the panel buttons are disabled, none of them are usable
when the printer cover is closed.
• In this printer, the panel button is the PAPER FEED button.
• When the printer cover is open, the PAPER FEED button is enabled
regardless of the settings of this command.
• In the macro ready mode, the PAPER FEED button is enabled
regardless of the settings of this command; however, the paper can
not be fed by using this button.
[Default] n = 0
ESC d n
[Name] Print and feed n lines
[Format] ASCII ESC d n
Hex 1B 64 n
Decimal 27 100 n
[Range] 0
≤
n
≤
255
[Description] Prints the data in the print buffer and feeds n lines.
[Notes]
• This command sets the print starting position to the beginning of
the line.
• This command does not affect the line spacing set by ESC 2 or
ESC 3.
• The maximum paper feed amount is 40 inches. If the paper feed
amount (nx line spacing) of more than 40 inches is specified, the
printer feeds the paper only 40 inches.
ESC i
[Name] Execute partial cut (one point left uncut)
[Format] ASCII ESC i
Hex 1B 69
Decimal 27 105
[Description] Executes a partial cut with one point left uncut.
[Notes]
• In standard mode, this command is enabled only when input at the
beginning of a line.
• This command and GS V 1 cut paper in the same way.
[Reference] GS V
ESC p m t1 t2
[Name] Generate pulse
[Format] ASCII ESC p m t1 t2
Hex 1B 70 m t1 t2
Decimal 27 112 m t1 t2
[Range] m = 0, 1, 48, 49