Epson TM-T85, Operator'S Manual

Page: 82 / 115

5-24 Commands
➁
If the starting position is the upper right or lower left of the
printing area, data is buffered in the paper feed direction:
Commands using horizontal motion units: ESC 3, ESC J, GS
$, GS \
Cmmands using vertical motion units: ESC SP, ESC $, ESC \
[Default] n = 0
[Reference] ESC $, ESC L, ESC W, ESC \, GS $, GS P, GS \
ESC V
n
[Name] Turn 90° clockwise rotation mode on/off
[Format] ASCII ESC V n
Hex 1B 56
n
Decimal 27 86 n
[Range] 0
≤
n
≤
1, 48
≤
n
≤
49
[Description] Turns 90° clockwise rotation mode on or off.
n is used as follows:
[Notes] • When underline mode is turned on, the printer does not underline
90° clockwise-rotated characters.
• Double-width and double-height commands in 90° rotation mode
enlarge characters in the opposite directions as from double-
height and double-width commands in normal mode.
• This command has no effect in page mode.
• If this command is input in page mode, the printer performs only
internal flag operations.
[Default] n = 0
[Reference]
ESC !
, ESC -
ESC W xL xH yL yH dxL dxH dyL dyH
[Name] Set printing area in page mode
[Format] ASC II ESC W xL xH yL yH dxL dxH dyL dyH
Hex 1B 57 xL xH yL yH dxL dxH dyL dyH
Decimal 27 87 xL xH yL yH dxL dxH dyL dyH
[Range] 0
≤
xL, xH, yL, yH, dxL, dxH, dyL, dyH
≤
255
[Description] • The horizontal starting position, vertical starting position, printing
area width, and printing area height are defined as x0, y0, dx
(inch), dy (inch), respectively.
Each setting for the printing area is calculated as follows:
n Function
0, 48 Turns off 90 ° clockwise rotation mode
1, 49 Turns on 90 ° clockwise rotation mode