Epson TM-T85, Operator'S Manual

Page: 103 / 115

Commands 5-45
• If the width set for the printing area is less than the width of one
character, when the character data is developed, the following
processing is performed:
➀
The set printing area width is extended to the right to
accommodate one character.
➁
If the printing area width cannot be extended sufficiently, the
left margin is reduced to accommodate one character.
• When developing the bit image for a downloaded bit image, the
following processes are performed if the width of the printing area
is less than the width required by the data sent with the ESC
✻
or
GS / command:
➀
The printing area width is extended to the right to
accommodate the data.
➁
If the printing area is still insufficient at
➀
, the left margin is
reduced to accommodate the data.
[Default] Thermal paper mode: nL = 128, nH = 1
Thermal label mode: nL = 112, nH = 2
[Reference] GSL, GS P
GS \ n
L
n
H
[Name] Set relative vertical print position in page mode
[Format] ASCII GS \ nL nH
Hex 1D 5C nL nH
Decimal 29 92 nL nH
[Range] 0
≤
nL
≤
255
0
≤
nH
≤
255
[Description] Sets the relative vertical print starting position from the current
position in page mode.
Printable area
Left margin
Printing area width set by nL and nH
Extended to right
A
Printable area
Left margin
➀
Extended to right
A
➁
Reduce left margin