Epson TM-T85, Operator'S Manual

Page: 62 / 115

5-4 Commands
• When Auto Status Back (ASB) is enabled using the GS a
command, the status transmitted by the DLE EOT command and
the ASB status must be differentiated.
• If the value of n is out of the specified range, the printer ignores
this command.
n = 1: Printer status
n = 2: Off-line status
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
2
Off 00 0
Drawer open/close signal is LOW (connector pin
3).
On 04 4
Drawer open/close signal is HIGH (connector pin
3).
3
Off 00 0 On-line.
On 08 8 Off-line.
4 On 10 16 Not used. Fixed to On.
5,6 - - - Undefined.
7 Off 00 0 Not used. Fixed to Off.
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
2
Off 00 0 Cover is closed.
On 04 4 Cover is open.
3
Off 00 0
Paper is not being fed by using the
PAPER FEED
button.
On 08 8 Paper is being fed by the
PAPER FEED
button.
4 On 10 16 Not used. Fixed to On.
5
Off 00 0 No paper-end stop.
On 20 32 Printing stops due to paper end.