ESC % n
[Name]
Select/cancel user-defined character set.
[Format]
<1B>H<25>H<n>
[Range]
O n 255
[Description]
Selects or cancels the user-defined character set.
l
Only the lowest bit of
n
is valid.
When
n
= <*******1>B, the user-defined character set
is selected.
[Default]
[Reference]
When n = <*******0>B, the user-defined character set
is canceled (and the internal character set is selected.)
n = 0
ESC &
ESC
& s n m [a[p]sXa]m-n+1
[Name]
Define user-defined characters
[Format]
<1B>H<26>H<s><n><m>[<a><p1><p2>…<psXa>]m-n+1
[Range]
s = 2
32 n m 126
0 a 12 (9X 9 font)
0 a 10 (7X 9 font)
0 p1…psXa
255
[Description]
Defines user-defined characters ANK character codes.
l
“s” specifies the number of bytes in vertical direction.
l
“n”
specifies the beginning ASCII code for the definition and
“rn ” the final code. If only one character is defined, use
n = m.
l
The allowable character code range is from ASCII code <20>H
to <7E>H.
When receive buffer capacity is 1 Kbyte, the maximum number
of characters is 9, and when receive buffer capacity is 40 bytes,
the maximum number of characters is 44.
l
When the maximum number of user-defined characters has
been defined, redefinition of the defined ASCII codes is possible
but definition of new ASCII codes is impossible.
l
“a” specifies the number of dots in the horizontal direction.
l
“p”
is the dot data for the characters. The dot pattern is in the
horizontal direction from the left side. Any remaining dots on the
right side are blank.
l
After user-defined characters are defined once, they are avail-
able until they are redefined, until ESC @ is executed, until the
printer is reset, or until the power is turned off.
3 4
Summary of Contents for TM-300A
