[Notes]
•
The status to be transmitted is shown below.
Value
Bit
Function
0
1
0
Roll
paper
near-end
Paper present
Near-end
1
Undefined
2
Roll paper end
Paper present
End
3
Undefined
4
Undefined
5
Not
used
6
Not used
Fixed to 0
-
7
Not used
l
When DTR/DSR control is selected, the printer transmits only 1
byte after confirming that the host is ready to receive data (DSR
signal is SPACE). If the host computer is not ready to receive
data (DSR signal is MARK), the printer will keep waiting until the
host is ready. When XON/XOFF control is selected, the printer
transmits only
1
byte without checking the DSR signal.
l
The status just after processing the data received before this
command is transmitted after the data processing is finished.
However, if printing is executed when this command has been
processed, the status just after the current line is printed and fed
is transmitted. There may be a time lag between receiving this
command and transmitting the status, so the user should be
aware of this.
ESC{
n
[Name]
[Format]
[Range]
[Description]
[Notes]
[Default]
Select/cancel upside-down character printing
<1B>H<7B>H<n>
O n 255
Selects or cancels upside-down character printing.
l
Only the lowest bit of
n
is valid.
When
n
= < * * * * * * * 1>B, upside-down character printing
is selected.
When
n
= < * * * * * * * 0>B, upside-down character printing
is canceled.
l
The upside-down character specification rotates normal char-
acters on the line by 180° and prints them.
l
Valid only when input at the beginning of a line.
n = 0
4 5
Summary of Contents for TM-300A
