3-3 Adjusting the Paper Near-End Detector
The paper near-end detector
The paper near-end detector senses when the paper is nearing its end and turns
on the PAPER LED.
The paper near-end detector can be adjusted according the thickness of the
paper core.
l
Adjusting the paper near-end detector
Roll paper differs in paper core size, so you may need to adjust the paper near-
end detector.
Make sure the paper core inside diameter (ød) is 10.5 to 12.5 mm.
Measure the paper core thickness A (Refer to Figure below) for the roll paper
to be used.
Determine the corresponding adjustment value from the table below.
Table 3-1. Paper Core Thickness and its Graduation Degrees
Dimension A Adjustment value
4.5
mm
#1
6.5
mm
# 2
8.5
mm
# 3
10 mm
# 4
18
Summary of Contents for TM-300A
