Epson SureColor SC-F9330 Series User Manual Download Page 51

Page: 51 / 145

Press the

buttons to select

Heater

Temperature

, and then press the

button.

Choose a value.

Press the

buttons to set the temperature.

When you press the

button, the settings for

the currently selected media are updated, and the
Heating & Drying menu is displayed.

When you press the

button, the menu is closed

and the status display screen is displayed.

Note:

The time needed for the heaters to reach the
specified temperatures varies with the ambient
temperature.

Correcting Banding

When you want to correct banding during printing,
perform Feed Adjustment.

Buttons that are used in the following settings

Press the

button during printing.

The current adjustment value is displayed.

Use the

buttons to change the current value.

If the feed amount is too small, black bands (dark
stripes) will appear; adjust the feed amount
upwards.

If, in contrast, the feed amount is too large, white
bands (pale stripes) will appear; adjust the feed
amount downwards.

Check the printing result. If you are not satisfied
with the results, use the

buttons to change

the value.

This updates the setting value of

Feed

Adjustment

in the currently selected media

settings.

Press the

button to display the status display

screen.

Note:

If the setting is changed, the icon is displayed on the
control panel screen as shown below. To clear this
icon, carry out the following operations.

❏

Restart

Feed Adjustment

❏

Execute

Restore Settings

SC-F9300 Series User's Guide

Basic Operations

Summary of Contents for SureColor SC-F9330 Series


















































































































































Search results

Summary of Contents for SureColor SC-F9330 Series

Reviews:

Related manuals for SureColor SC-F9330 Series

Brands by name

Popular brands

Epson SureColor SC-F9330 Series, User Manual

Search results

Summary of Contents for SureColor SC-F9330 Series

Reviews:

Related manuals for SureColor SC-F9330 Series

Brands by name

Popular brands