manualshive.com logo in svg

Epson SureColor SC-F7000, User Manual

Share
Download
Epson SureColor SC-F7000 User Manual Download Page 55

B

Ink spatters on the base of the print head can be
removed using a clean room wiper (available in
the market).

c

Important:

❏

Be sure not to touch the nozzle surface
during cleaning. Failure to observe this
precaution could damage the print head.

❏

The parts shown below are sensors. Be
careful not to touch this area with your
hands or clean room wiper. Failure to
observe this precaution could affect print
quality.

Cleaning Wiper and Caps

A

Clean the front and back of the wiper with a
cleaning stick.

If the attachment points do not require cleaning,
clean the wiper as shown below and proceed to
Step 7.

If there is ink on the attachment points, remove
the wiper for cleaning. Proceed to Step 2.

B

Remove the wiper.

Holding the wiper by the attachment point, tilt it
left and lift it out.

SC-F7000 Series     User’s Guide

Maintenance

55

Summary of Contents for SureColor SC-F7000






































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands