C
Place media on the roll support oriented
according to how it is rolled (see below) and
position it as indicated by the mark on the label.
Printable Side Out
Printable Side In
If the label does not have the loading position,
mark it on the label as instructed in the
Setup
Guide
.
U
Setup Guide
Note:
Be sure the option selected for
Roll Type
in the
Customize Settings
menu matches how the media
is rolled.
Roll Type
defaults to
Printable Side Out
.
Be sure to select
Printable Side In
after loading
media rolled printable side in.
For more information see
U
D
Raise the lift lever on the left side of the printer to
lift the media into position, then firmly insert the
roll holder.
If the roll of media has the outer diameter which
is less than 140 mm, lift it up by your hands, and
set it to the roll holder. The roll core will not reach
the holder when raised using the lift lever.
E
Tighten the roll holder screw to fix the roll holder
in place.
SC-F7000 Series User’s Guide
Basic Operations
24
