!
Caution:
❏
Be sure that your hands or hair do not get
caught in the auto take-up reel unit while it is
in operation.
Failure to observe this precaution could result
in injury.
❏
Perform the following procedure to correctly
secure the roll core for the auto take-up reel
unit into place.
Injury may occur if the take-up roll falls.
Attaching the Roll Core
A
After confirming that the media is loaded
correctly, press the
d
button to feed the media as
far as the auto take-up reel unit roll core holder.
B
Loosen the roll core holder locking screws and
adjust the roll core holders so that the gap
between the two is wider than the media.
Center the roll supports between the roll holders.
C
Align the right roll core holder with the right
edge of the media and tighten the locking screw.
D
Insert the roll core onto the right holder.
E
Insert the left holder into the roll core.
Slide the holder in until part A in the illustration
below is fully inserted.
SC-F7000 Series User’s Guide
Basic Operations
36
