❏
Close all covers before placing the printer in
storage. If you are not using the printer for a long
time, put an anti-static cloth or cover on the printer
to prevent dust. The print head nozzles are very
small, and they can become clogged easily if fine
dust gets on the print head, and you may not be able
to print properly.
❏
If you have not used the printer for a long time,
check the print head for clogging before you start
printing. Perform head cleaning if the print head is
clogged.
U
“Checking for clogged nozzles” on page 51
❏
When storing the printer, be sure that it is level: do
not store it on an angle, on end, or upside down.
Notes on Handling Ink Packs and
Ink Tanks
Note the following points when handling ink packs and
ink tanks.
❏
Do not remove the ink tanks.
Ink tanks are calibrated when installed. Removing
them can harm quality and functionality.
❏
Store ink packs at room temperature out of direct
sunlight.
❏
To ensure print quality, use all the ink in the ink
pack before the earlier of the following dates:
❏
The date printed on the ink pack
❏
25 days from the day that the ink tank was
refilled from the ink pack
❏
If the ink pack has been stored in a cold location for
a long period of time, keep at room temperature for
at least 4 hours before using.
❏
When refilling the ink in an ink tank, be sure to use
all the ink in the ink pack at once.
❏
Refill the ink tank as soon as possible after opening
the ink pack.
❏
Do not place any objects on top of the ink tank.
Handling Media
Note the following when handling or storing media.
Media that are in poor condition will not produce good
quality prints.
Be sure to read the documentation provided with each
type of media.
Notes on Handling
❏
Do not fold the media or damage the printable
surface.
❏
Do not touch the printable surface. Moisture and
oils from your hands can affect print quality.
❏
When handling media, hold it by both edges. We
recommend wearing cotton gloves.
❏
Keep the media dry.
❏
Packaging materials can be used to store media and
should not be thrown away.
❏
Avoid locations that are subject to direct sunlight,
excessive heat, or humidity.
❏
When not in use, media should be removed from
the printer, rewound, and inserted in its original
packaging for storage. Leaving media in the printer
for extended periods may cause it to deteriorate.
Handling Media After Printing
To maintain long lasting, high quality print results, note
the following points.
❏
Do not rub or scratch the printed surface. If they are
rubbed or scratched, the ink may peel off.
❏
Do not touch the printed surface, as this may
remove the ink.
❏
Make sure printouts are completely dry before
folding or stacking, as otherwise discoloration or
other marks may appear where the prints touch.
These marks will disappear if the prints are
immediately separated and dried but will become
permanent if the surfaces are not separated.
❏
Avoid direct sunlight.
SC-F7000 Series User’s Guide
Introduction
19
