Note:
If you would prefer to print from the very start of the
roll, press the
u
button in the control panel to
rewind the media slightly.
Be sure, however, to stop rewinding before the
leading edge of the media is past the cutter groove
(on the pressure roller side).
If the leading edge of the media is curled, stop
rewinding before the media reaches the inner side
of the front cover.
P
Attach the media holding plates at either side of
the media.
First, position the plates so that the edges of the
media are in the centers of the round holes. Next,
adjust the position until the white line is visible in
the square window and push the plates down to
lock them in place and keep them from lifting.
c
Important:
❏
Do not use the media holding plates with
media that is more than 0.4 mm thick.
The media holding plates could touch
and damage the print head.
❏
Move the media holding plates to the left
and right edges of the platen when they
are not in use.
❏
Do not use the media holding plates if the
sides of the printed media are smudged or
torn.
❏
Leave left and right margins of over 10
mm when using the media holding
plates. Narrower margins could result in
printer printing over the plates.
Q
Close the front cover.
Viewing and Changing Media
Settings
The control panel displays the following information
once the media is loaded.
This display can be used to view or change the following
two options:
SC-F7000 Series User’s Guide
Basic Operations
32