Epson SureColor F9200, User Manual

Page: 79 / 243

Caution: Follow the instructions in the topic links below the table to use these menu settings correctly.
Setting Options Description
Media Remaining Remaining Setup Displays and records the amount of
media remaining on a roll.
Length Enter the total roll length, from 3 to
3280 ft (1.0 to 999.5 m).
Remaining Alert Enter the length at which the printer will
alert you, from 4 to 50 ft (1 to 15 m).
Print Remaining Length Prints the amount of media remaining
on the current roll before you replace it.
Select Media 1 to 30 Selects a number for the settings bank
to use for printing.
RIP Settings Specifies using the software RIP
settings instead of the printer settings.
Customize Settings — See the next table.
RIP Settings — See the third table.
Print Media List Print Prints the contents of media setting
banks 1 to 30.
Customize Settings options
Options Description
Current Settings Changes settings for the currently selected media.
Setting Name Enter a name up to 22 characters for the media settings
bank.
Feed Adjustment Select Manual if banding persists after head cleaning and
alignment.
Platen Gap Select 2.0 for most media. Select 1.5 if print quality is
unsatisfactory. Select 2.5 only if printouts are scratched or
smudged. Choosing a larger gap than necessary can
cause ink stains inside the printer, reduced print quality, or
shorter product life.
79