Epson Stylus Photo R3000 Series, Service Manual

Page: 42 / 73

Confidential
Adjustment Details of Adjustments (TBD) 42
Epson Stylus Photo R3000 Revision A
6. Turn the Center Support Bushing Cam so that the long hand position is +5

m from the “0” adjustment
position. (TBD)
Figure 2-6. Positional Relationship between Center Support Bushing Cam and the Dial Gage
7. Tighten the screw that secures the Center Support Bushing Cam.
The standard range of the PF Roller Shaft Center Support Position Adjustment is as follows:
 Standard value: -20

m - 30

m
 Adjustment resolution: 50

m ( TBD )
 +5

m must be set to compensate for the thickness of the coating on the PF Roller Shaft.
( TBD )
 Make sure that the position of the short hand is the same as at “0” adjustment.
Check the adjustment value again as it deviates slightly when the screw is tightened.
down
up
Center Support
Bushing Cam