Epson Stylus Photo PX730WD/Artisan 730, Basic Operation Manual

Page: 82 / 112

Error Messages Solution
Paper jam
R
&
91
Printer error. Turn power off and then on again. For
details, see your documentation.
R
& 96
Cannot recognize photos. Make sure photos are placed
correctly. See your documentation.
R
&
29
Communication error. Make sure the computer is
connected, then try again. Make sure the computer is connected correctly. If the error message still
appears, make sure that scanning software is installed on your computer
and that the software settings are correct.
A printer’s ink pad is nearing the end of its service life.
Please contact Epson Support. Press x button to resume printing. The message will be displayed until
the ink pad is replaced. Contact Epson support to replace ink pads before
the end of their service life. When the ink pads are saturated, the printer
stops and Epson support is required to continue printing.
A printer’s ink pad is at the end of its service life. Please
contact Epson Support. Contact Epson support to replace ink pads.
Backup Error.
Error Code xxxxxxxx A problem occurred and backup was canceled. Make a note of the error
code and contact Epson support.
The combination of IP address and subnet mask is
invalid. See your documentation. Refer the online Network Guide.
Recovery Mode The firmware update has failed. You will need to re-attempt the firmware
update. Ready a USB cable and visit your local Epson website for further
instructions.
Error Messages
Сообщения об
ошибках
Повідомлення про
помилки
أطلخا لئاسر
اطخ یاهمایپ
EN
EN
RU
UK
AR
R
&
85
R
&
84
R
&
83
R
&
82
FA
R
&
86