4-18
Using Roll Paper
R4C706
long.bk
Rev. C
A5 size
ROLL.FM
7/19/01
L
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
5. Go to the
Main
menu and select the media type.
6. Click
OK
to close the printer software. Print your document
and proceed to the next section, “Removing Roll Paper from
the Printer” on page 4-22.
For Macintosh users
Note:
❏
The procedures described in this section may vary, depending upon
the application you are using. Check your application’s user manual
for details.
❏
When printing on roll paper, you cannot use the
Reverse Order
or
Rotate by 180°
features, select
Maximum
or
Centered
as
the Printable Area setting, or use the functions in the Layout dialog
box.
❏
Do not select
PhotoEnhance
in the printer software, because it
may cause your printout to have gaps.
After the roll paper is loaded in the printer, make sure that the
Stylus Photo 895 is selected in the Chooser before proceeding.
Follow the steps below to configure your printer software for
printing.
1. Open the file that you want to print in the appropriate
application.
Print page frame
Select this check box to print a line on the roll
paper between pages in a multi-page
document to indicate where the paper
should be cut. This feature is useful when it is
unclear where the page breaks should be or
where the paper should be cut after the last
page has been printed. This feature is only
available when Cut Sheet Mode is selected.
