10-12
Troubleshooting
R4C706
long.bk
Rev. C
A5 size
TRBLE.FM
7/19/01
L
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
❏
Make sure that your paper is dry and that the printable side
is facing up. Also, make sure that you are using an acceptable
paper type. See “Paper” on page A-1 for specifications.
❏
Clear all settings, and select
Automatic
as the Mode setting
on your printer software’s Main menu (Windows) or in the
Print dialog box (Macintosh).
❏
If the paper is curled toward the printable side, flatten it or
curl it slightly in the opposite direction.
❏
Set the adjust lever to the “+” position, and make sure the
Media Type setting in your printer driver is correct.
❏
Remove each sheet from the output tray as it is printed,
especially if you are using transparencies.
❏
If you are printing on glossy media or transparencies, place a
support sheet (or a sheet of plain paper) beneath the stack, or
load only one sheet at a time.
❏
When printing on thick media, set the adjust lever to the “+”
position.
❏
Run the Head Cleaning utility. See “Cleaning the Print Head”
on page 9-4.
❏
Run the Print Head Alignment utility.
