Troubleshooting
10-9
R4C706
long.bk
Rev. C
A5 size
TRBLE.FM
7/19/01
R
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
❏
Make sure that the printable side of the paper is face up in the
sheet feeder.
❏
Run the Head Cleaning utility to clear any clogged ink
nozzles. See “Cleaning the Print Head” on page 9-4.
❏
Clear all settings, and select
Automatic
as the Mode setting
on your printer software’s Main menu (Windows) or in the
Print dialog box (Macintosh).
❏
Make sure that
Maximum
is not selected as the Printable Area
setting in your printer software. When this setting is selected,
banding may occur in the expanded area.
❏
Make sure that the Media Type selected in the printer
software is appropriate for the type of media loaded in the
printer.
❏
Select MicroWeave if the setting is active.
❏
Make sure that the position of the adjust lever is appropriate
for the media type. When printing on media of normal
thickness, set the adjust lever to the “0” position. When
printing on envelopes or thick media, set the position to “+”.
Vertical misalignment or banding
Try one or more of these solutions:
❏
Make sure that the printable side of the paper is face up in the
sheet feeder.
❏
Run the Print Head Alignment utility.
❏
Clear the
High Speed
check box in the Advanced dialog box
of your printer software’s Advanced dialog box. For
Windows users, see “Making Advanced settings” on page
5-13 for details. For Macintosh users, see “Making the
Advanced settings” on page 7-130.
