Troubleshooting
10-17
R4C706
long.bk
Rev. C
A5 size
TRBLE.FM
7/19/01
R
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
❏
The paper is not loaded higher than the arrow on the left edge
guide.
❏
Paper is not jammed inside the printer. If it is, remove the
jammed paper.
❏
The black and/or color ink cartridges are not empty. If one is,
replace the appropriate cartridge. To determine which
cartridge is empty, see “Replacing Ink Cartridges” on page
8-1.
Load the paper again. Make sure that you follow any special
loading instructions that came with your paper. Also see “Paper
Handling” on page 19.
Multiple pages feed
❏
For the users directly printing from PC card, do not select A4
or 100
×
150 mm sheet paper for the Paper Size setting when
roll paper is loaded in the sheet feeder. Doing so causes
unnecessary paper to be fed after each print job. If you have
already started printing, press the
Cancel
button. Wait until
the printer stops printing and feeding paper. Cut off the paper
at the back of the printer, then turn off the printer. The
remaining paper is ejected.
❏
Make sure that the paper stack fits under the arrow mark
located on the inside surface on the left edge guide.
❏
Make sure that the left edge guide is snug to the left edge of
the paper.
❏
Make sure that the paper is not curled or folded. If so, flatten
it or curl it slightly toward the opposite side before loading.
❏
Make sure that the position of the adjust lever is appropriate
for the media type. When printing on media of normal
thickness, set the adjust lever to the “0” position. When
printing on envelopes and thick media, set the position to “+”.
