Epson Stylus Color 670, Service Manual

Page: 123 / 152

EPSON Stylus COLOR 670 Revision A
Maintenance Overview 123
6.1 Overview
This section provides information to maintain the printer in its optimum
condition.
6.1.1 Cleaning
This printer has no mechanical components which require regular cleaning
except the printhead. Therefore, when returning the printer to the user, check
the following parts and perform appropriate cleaning if stain is noticeable.
o
Exterior parts
Use a clean soft cloth moistened with water and wipe off any dirt. If
the exterior parts are stained with ink, use a cloth moistened with
neutral detergent to wipe it off.
o
Inside the printer
Use a vacuum cleaner to remove any paper dust.
o
ASF LD Roller
If paper dust on the surface of ASF LD Roller lowers the friction, set
the adhesive surface of the cleaning sheet included in the media to
the surface of the ASF roller and repeat loading paper from the ASF.
C A U T I O N
n
Never use chemical solvents, such as thinner, benzine, and
acetone to clean the exterior parts of printer like the
housing. These chemicals may deform or deteriorate the
components of the printer.
n
Be careful not to damage any components when you clean
inside the printer.
n
Do not scratch the surface (coated part) of PF roller
assembly. Use soft brush to wipe off any dusts. Use a soft
cloth moistened with alcohol to remove the ink stain.
n
Do not use cleaning sheet included in the media for normal
usage. It may damage the coated surface of PF roller.