Return
Pin Pin
ERROR OUT This level becomes LOW
when the printer:
Is out of paper
The Pause button is
pressed
Is In an error state
Same as for
NC
OUT Pulled up to 5 through
1 resistance
NC IN Not used
Note:
The column
heading
“Direction
refers
to
the
of signal
flow
from the printer.
denotes the twisted-pair
return, to be connected at signal
ground
For
interface
wiring, be sure to use a twisted-pair
cub/e
for
signal and to
the
on the return
side.
A//interface conditions are
on the
the
and
times
of
must be less
than
microseconds.
Data transfer must be carried out by observing the
or BUSY
signal. Data
to this printer can be carried out
after receipt
of the
signal or when the
is
LOW.
Initialization
The printer can be initialized (returned to a fixed set of conditions) in
three ways:
Hardware initialization
The power is turned on.
*The
an
from the
parallel interface
goes LOW).
The
then results:
The printer mechanism
The
data buffer Is cleared.
The download character set is cleared.
The
buffer cleared.
The default values are set.
A-10 Appendix
Summary of Contents for Stylus Color 400
Page 1: ...U S E R S GUIDE aa ...
