Epson Stylus Color 400 User Manual Download Page 67

Page: 67 / 108

The font selected on the control panel does not print

Software settings override the control panel settings. Use the

font settings in your software.

The wrong characters are printed.

The wrong character table is selected. Change the character

table as described in “Using the Default-Setting Mode” in

Chapter

Printing starts too high or too low on the page.

Adjust the top margin using your software program.

All the text prints on the same line.

Set auto line feed to on in the default-setting mode so that the

printer automatically adds a line-feed code to each carriage

See “Using the Default-Setting Mode” in Chapter

The text prints an extra blank line between each text line.

Set auto line feed to off in the default-setting mode so that two

line-feed signals are not sent. See “Using the Default-Setting

Mode” in Chapter

Line spacing is incorrect. Adjust the line-space setting with

your software.

Printed page length is not as expected.

The page length setting may not match the length of the paper

loaded the printer. Change the page length setting within

your software to match the paper you are using.

Maintenance and

3-11

Summary of Contents for Stylus Color 400













































































































Search results

Summary of Contents for Stylus Color 400

Reviews:

Related manuals for Stylus Color 400

Brands by name

Popular brands

Epson Stylus Color 400, User Manual

Search results

Summary of Contents for Stylus Color 400

Reviews:

Related manuals for Stylus Color 400

Brands by name

Popular brands