Epson Stylus Color 400 User Manual Download Page 14

Page: 14 / 108

Important Safety Instructions

Read all of these instructions before you set up your printer.

Follow all warnings and instructions marked on the printer.

Unplug the printer from the wall outlet before you clean it,

and use a damp cloth for cleaning, not liquid or aerosol

cleaners.

Do not use your printer near water or spill any liquid on it.

Do not place the printer

unstable cart, stand, table, or

other surface that may allow the printer to fall.

Do not block any slots or openings in the cabinet. These are

provided for the ventilation necessary to ensure reliable

operation and protection from overheating. Placing the

printer on a bed, sofa, rug, or other similar surface may

block the openings. Also, do not place the printer in a

built-in installation unless proper ventilation is provided.

Never place the printer near or over a radiator or heat

Use the type of power source indicated on the label. If you

are not sure of the type of power available, consult your

dealer or local power company.

This printer may be equipped with a plug having a third

(grounding) pin, which fits only into a grounding-type

outlet. This is a safety feature. If you are unable to insert the

plug into the outlet, have an electrician replace your

obsolete outlet. Do not defeat the purpose of the

grounding-type plug.

Do not put your printer where the cord will be walked on.

Summary of Contents for Stylus Color 400













































































































Search results

Summary of Contents for Stylus Color 400

Reviews:

Related manuals for Stylus Color 400

Brands by name

Popular brands

Epson Stylus Color 400, User Manual

Search results

Summary of Contents for Stylus Color 400

Reviews:

Related manuals for Stylus Color 400

Brands by name

Popular brands