Running the self test
1. Make sure the printer is turned off.
2. While holding down the
Font
button, turn on the printer. It
loads a sheet of paper automatically from the paper feeder
and begins the self test. It prints on the first and last lines of
page 1 to measure the page length. Then the printer prints
characters in each font on page 2.
Here is part of a typical self test:
C o u r i e r
Roman
3. The self test continues until the paper in the paper feeder
runs out or you press the
Pause
button. To stop the test,
press the
Pause
button. To resume the test, press the
Pause
button again.
4.
To end the self test, press the
Pause
button to stop printing
and then press the
Load/Eject
button to eject the paper.
5. Turn off the printer.
Setting Up Your Printer
1-15
Summary of Contents for Stylus Color 400
Page 1: ...U S E R S GUIDE aa ...