Epson Stylus Color 400 User Manual Download Page 56

Page: 56 / 108

On 0 Off

Note:

the table you printed in Step 3 on page 2-14 includes

“Submenu 3, ” use that table to select the character table setting

instead of the one above.

Exit the default-setting mode by turning off the printer.

Note:

You may exit the default-setting mode any time by turning of

You may exit the default-setting mode any time by turning off

the printer. Any

changes you have made remain

in effect

the

Any

changes you have made remain

you change

again.

you change

again.

you

to check new default settings, enter the

mode again and print the

settings. After

you check them, turn the printer to exit without making

changes.

Using Other Printer Functions 2-17

Summary of Contents for Stylus Color 400













































































































Search results

Summary of Contents for Stylus Color 400

Reviews:

Related manuals for Stylus Color 400

Brands by name

Popular brands

Epson Stylus Color 400, User Manual

Search results

Summary of Contents for Stylus Color 400

Reviews:

Related manuals for Stylus Color 400

Brands by name

Popular brands