Epson Stylus C87, Service Manual

Page: 15 / 109

EPSON Stylus C87/C88/D88 Revision A
PRODUCT DESCRIPTION Operator Controls 15
1.3.3 Printer Condition and LED Status
Note *: “---” indicates that the indicator status varies according to the printer condition at
that time.
1.3.4 Duplex Printing
Select the duplex printing mode from the printer driver, and follow the steps below to
perform the duplex printing.
1. Print all the odd pages.
2. Turn over the ejected pages on the paper eject tray, and load them on the ASF.
3. Print all the even pages.
1.3.5 Errors
Errors that may occur with this printer are described below.
Table 1-7. Printer Condition and LED Status
Printer status
Indicators
Priority
Power LED Paper LED Ink LED
Power on On -- -- 11
Ink level low -- -- Flashes 10
Data processing Flashes -- -- 9
No ink cartridge or ink end -- -- On 8
CSIC Error -- -- On 8
Ink sequence Flashes -- -- 7
Ink cartridge change mode Flashes -- -- 6
Paper out -- On -- 5
Multi-feed --- On --- 5
Paper jam condition -- Flashes -- 4
Maintenance request
(Waste ink counter overflow)
Off
Flashes
alternately
Flashes
alternately
3
Fatal error Off Flashes on
high speed Flashes on
high speed 2
Power off Flashes on
high speed Off Off 1
Reset request On On On --
Table 1-8. Error Status
Error Description
Ink out The predetermined level of ink is used.
Paper out The printer fails to load a sheet.
Paper jam
Occurs under the following conditions:
• Papers could not be ejected after the specified number of times
of paper feed operation.
• Papers could not be ejected by FF command or pressing the
Paper switch.
Multi-feed Multiple papers are fed to the printer.
No ink-cartridge /
Cartridge Error
Occurs under the following conditions:
• Ink cartridge is not installed or removed.
• CSIC information could not be read/written normally.
Maintenance request Total quantity of waste ink has reached the specified level.
Fatal errors Non-recoverable error such as carriage control error.