Epson Stylus C87, Service Manual

Page: 53 / 109

EPSON Stylus C87/C88/D88 Revision A
DISASSEMBLY/ASSEMBLY Dissasembly Procedures 53
7) Release the two tabs on the PF Motor side of the Housing, Lower Assy, and
remove the Housing, Lower Assy.
Figure 4-25. Removing Housing, Lower Assy. (2)
C A U T I O N
When performing the following work, be sure to hold the places
indicated with dotted circles to avoid deformation of the Main Unit
Frame.
Figure 4-24. Holding Positions of Housing, Lower Assy.
Holding Positions
Tab
PF Motor
„ To ensure the assembling accuracy, you have to control the
assembled standard position of the Main Frame against X/Y/Z-
axis direction as follows.
[X-axis direction]
•
Make sure that main frame is correctly placed on the
groove of Housing (Lower).
•
Make sure that there is no gap between main frame and
Housing (Lower).
[Y-axis direction]
•
Make sure that cut-out portion of main frame is correctly
placed on the square protrusion of Housing, Lower.
Figure 4-26. X and Y-axis Assembled Standard Position
X-axis Assembled Standard Position
Y-axis Assembled Standard Position
Housing,
Lower Assy.