Epson Stylus C87, Service Manual

Page: 79 / 109

EPSON Stylus C87/C88/D88 Revision A
DISASSEMBLY/ASSEMBLY Dissasembly Procedures 79
4.3.3.19 PF Motor
1) Remove the Housing, Lower Assy.. (p51)
2) Remove the PF Timing Belt, Idle Roller Assy, and Compression Spring 1.13
from the Main Unit.
Figure 4-87. Removing PF Motor (1)
3) Remove the four hexagon nuts that secure the PF Motor to the Main Unit.
Figure 4-88. Removing PF Motor (2)
4) Remove Compression Spring 1.53, and remove the PF Motor.
Figure 4-89. Removing PF Motor (3)
PF Timing Belt
Idle Roller Assy.
Compression
Spring 1.13
1
2
3
4
Hexagon Nuts, Normal, M3
(6
±
1 kgf.cm)
PF Motor
„ When installing the PF Motor, make sure to attach
Compression Spring 1.53 to the part shown in
Figure 4-89 .
„ When installing the PF Motor, secure the hexagon nuts in the
order shown in
Figure 4-88 .
A D J U S T M E N T
R E Q U I R E D
„ When PF motor is removed or replaced with new one, the
following adjustment must be performed in the order below.
1)
Top Margin Adjustment
2) PF Adjustment
Compression Spring 1.53 PF Motor