Epson SF-180 User Manual Download Page 73

Page: 73 / 140

Creating an Account (When Using for the First Time)

You need to create an account with the Web application (RUNSENSE View) when using it for the first time.

Connect the cradle to the computer on which Run Connect is installed with a USB
cable.

Place the device into the cradle.

Check that the contact points on the device are pointing up and match the contact marks on the cradle.

After placing the device into the bottom of the cradle, push carefully on the top of the device until it is fixed in
place.

Important:

Make sure the device is placed in the correct direction; otherwise, the device or the cradle could be damaged.

Start Run Connect.

Note:

If Run Connect does not start, disconnect the cable from the cradle, wait a few seconds, and then reconnect. Do not
remove the device from the cradle.

User Manual

Data Management Using the Web Application (RUNSENSE View)

Summary of Contents for SF-180












































































































































Search results

Summary of Contents for SF-180

Reviews:

Related manuals for SF-180

Brands by name

Popular brands

Epson SF-180, User Manual

Search results

Summary of Contents for SF-180

Reviews:

Related manuals for SF-180

Brands by name

Popular brands