Epson SF-180 User Manual Download Page 40

Page: 40 / 140

Stop measuring.

Press

while measuring.

Press

to resume measuring.

Reset the measurement results.

Hold down

while measuring is stopped.

When you reset the display, it returns to the
status before measuring started allowing you to
start the next measurement.

Data measured up to that point is stored in the
device's memory, and you can check it by
pressing

on the time screen.

“Checking Measurement Data” on

page 63

Note:

To stop measuring and return to the time screen

❏

After resetting the measurement results in step 5,
hold down

❏

While the screen in step 4 is displayed while
measurement is stopped, hold down

. The

measurement results are reset and the time screen is
displayed.

❏

If no operations are made for 60 minutes on a screen
other than the measuring screen, the time screen is
displayed.

User Manual

Measure

Summary of Contents for SF-180












































































































































Search results

Summary of Contents for SF-180

Reviews:

Related manuals for SF-180

Brands by name

Popular brands

Epson SF-180, User Manual

Search results

Summary of Contents for SF-180

Reviews:

Related manuals for SF-180

Brands by name

Popular brands