Changing the Measurement
Screen
The setting method varies depending on the screen
pattern. See the explanations for each screen pattern.
U
“Setting
1 Line
/
2 Lines
/
3 Lines
” on page 110
U
“Setting
Pace&Graph
/
HR&Graph
” on page 111
U
“Setting
Lap
/
Target Pace
/
OFF
” on page 113
c
Important:
❏
When performing GPS positioning, make
sure the screen is facing up and you are
outside with no obstructions overhead.
U
“Specifying a GPS (GPS Positioning)” on
page 30
❏
It usually takes less than two minutes to
complete GPS positioning.
If it takes more than two minutes and
Failed
is displayed, we recommend selecting
Cancel
, moving to a different location, and
trying again.
Setting 1 Line/2 Lines/3 Lines
Here we will explain how to display
Calories Burnt
in
Screen4
using
1 Line
.
Operation buttons
A
Display the measurement screen.
Use one of the following methods to display.
❏
When performing GPS positioning:
Press
C
on the time screen.
❏
When skipping GPS positioning:
Press
C
on the time screen, and then select
Skip
on the GPS positioning screen.
U
“Skipping GPS positioning” on
page 31
❏
When not performing GPS positioning
(indoor mode):
Hold down
C
on the time screen.
U
“Indoor mode” on page 32
B
Display the
Measure set.
menu.
Hold down
B
on the measurement screen.
C
Select
Screen
.
Use
C
/
D
to select, and then press
A
.
D
Select
Screen4
.
Use
C
/
D
to select, and then press
A
.
User Manual
Settings
110
