F
Set today's date.
Use
C
/
D
to select, and then press
A
.
G
Set the
Date Format
.
Use
C
/
D
to select, and then press
A
.
H
Go to a location outside with no
obstructions overhead.
c
Important:
Take the following steps to receive a signal
from the GPS and synchronize time
automatically. Since the signal from the
GPS cannot be received indoors, go outside
to a location without any obstructions
overhead.
I
Complete the settings.
Use
C
/
D
to select
Yes
, and then press
A
.
A signal is received from the GPS and time is
automatically synchronized.
When
Complete
is displayed, press
A
.
The time screen is displayed.
Note:
❏
When you leave the device for a while, it enters sleep
status and the time display turns off. This is not a
malfunction as the display is restored the next time
you move the device.
❏
If time synchronization fails, the signal from the GPS
may not be being received properly. Perform
Time
Adjust
from
Sys. Settings
.
U
“Sys. Settings” on page 102
User Manual
Preparing and Basic Operations
27
