Automatically Start/Stop
Measuring (AT Pause
Function)
Measuring stops automatically when you stop running,
and resumes when you continue running.
c
Important:
❏
When performing GPS positioning, make
sure the screen is facing up and you are
outside with no obstructions overhead.
U
“Specifying a GPS (GPS Positioning)” on
page 30
❏
It usually takes less than two minutes to
complete GPS positioning.
If it takes more than two minutes and
Failed
is displayed, we recommend selecting
Cancel
, moving to a different location, and
trying again.
Operation buttons
A
Display the measurement screen.
Press
C
on the time screen.
GPS positioning starts, and the measurement
screen is displayed once positioning is complete.
Note:
❏
You can skip GPS positioning if you want to
start measuring immediately or if it is taking
too long.
U
“Skipping GPS positioning” on page 31
❏
Use indoor mode when GPS positioning
cannot be performed because you are indoors
and so on.
U
“Indoor mode” on page 32
B
Displays the
Measure set.
menu.
Hold down
B
on the measurement screen.
C
Select
AT Pause
.
Use
C
/
D
to select, and then press
A
.
D
Select
ON
.
Use
C
/
D
to select, and then press
A
.
User Manual
Measure
58
