Epson Series Perfection 1240U Series Page 45 Reference Manual Download

Page: 45 / 166

Scanning Basics

2-15

2. Move the eyedropper to the location you want to select as the

shadow point, and then click.

The brightness of the pixel at the point you click is set as the
shadow level, and the other parts of the image are adjusted
accordingly.

3. To change the shadow level (darkness) of the point you

selected, move the

Shadow

slider left or right, or enter a value

in the text box. You can enter a value between 0 and 60 for the
shadow.

Note:

See “Image Controls” on page 3-19 for further information on
adjusting the shadow level.

Summary of Contents for Series Perfection 1240U Series







































































































































































Search results

Summary of Contents for Series Perfection 1240U Series

Reviews:

Related manuals for Series Perfection 1240U Series

Brands by name

Popular brands

Epson Series Perfection 1240U Series, Reference Manual

Search results

Summary of Contents for Series Perfection 1240U Series

Reviews:

Related manuals for Series Perfection 1240U Series

Brands by name

Popular brands