Epson Series Perfection 1240U Series Page 105 Reference Manual Download

Page: 105 / 166

Option

5-3

Installing the Film Adapter

Follow the steps below to install the Film Adapter on the scanner.

1. Make sure the scanner is turned off.

2. Remove the document cover from the scanner by opening it

and pulling it straight up. (See “Removing the Cover for Thick
or Large Documents” on page 6-5)

3. Place the Film Adapter on the document table so that the

hinges face the rear of the scanner and it fits on the table.

35mm strip film

35mm strip film (to be scanned

from EPSON Photo Print)

120/220 (6cm

9cm film)

5 inch film

Summary of Contents for Series Perfection 1240U Series







































































































































































Search results

Summary of Contents for Series Perfection 1240U Series

Reviews:

Related manuals for Series Perfection 1240U Series

Brands by name

Popular brands

Epson Series Perfection 1240U Series, Reference Manual

Search results

Summary of Contents for Series Perfection 1240U Series

Reviews:

Related manuals for Series Perfection 1240U Series

Brands by name

Popular brands