Basic Operating
Procedures (Mac)
Printing Procedure
This section describes the basic procedure to print
using the printer driver from a computer.
Basic Printing Procedure
A
Turn on the printer, and load the paper.
U
“Loading Roll Paper” on page 28
U
“Loading Paper in the Auto Sheet Feeder”
U
“Loading Cut Sheet(1 sheet)” on page 37
B
When you have created the data in the
application, click
in the
File
menu.
C
Click
Show Details
(or
) at the bottom of
the screen.
Note:
If page settings are not displayed in the print
dialog, click the "page settings" option (e.g.,
Page
Setup
) in the
File
menu.
D
Check that this printer is selected, and then set
the paper size.
There are three options for each paper size. For
example, if you click the A2 size, the following
three options appear.
❏
A2
❏
A2 (Retain Scale)
❏
A2 (Roll Paper - Banner)
Normally, select the option without parenthesis
(A2 in the example above). Select the other two
options at the following times.
Retain Scale
PDF and image data may be printed reduced
slightly even when the output size is set to
Same
as Paper Size
in the following procedure. This
occurs to make sure there are the margins
required by the printer (3 mm on each the left
and right). Select this when you want to print at
the actual size without reducing the size.
Roll Paper - Banner
Select this when printing a banner to roll paper
from an application designed for banner
printing.
SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide
Printing with the Printer Driver from Your Computer
52
