Epson SC-T3100 Series User Manual Download Page 138

Page: 138 / 178

Replacing the Cutter

Replace the cutter when it is not cutting paper cleanly.

Supported cutters

Use a cross-head screwdriver to replace the cutter.
Make sure you have a cross-head screwdriver with you
before you start work.

Caution:

Store the cutter out of reach of children. The
cutter's blade could cause an injury. Pay careful
attention when replacing the cutter.

Important:

❏

Dropping the cutter, or knocking it against
hard objects may chip the blade.

❏

The protective material and sheet is to protect
the blade on the new cutter. Do not remove
them until you are instructed to do so.

From the Home screen, touch

Settings

Maintenance

Replace Cutter

The Replace Cutter screen appears.

Touch

Start

and open the cutter cover.

Loosen the screw holding the cutter in place
using a cross-head screwdriver and pull the
cutter straight out.

Note:

Place the used cutter in a plastic bag, then dispose
of in accordance with regional ordinances, and as
directed by local government.

Install the new cutter.

Insert the cutter so that the pin on the printer
matches up with the hole on the cutter. Use a
cross-head screwdriver to tighten down the
screw to hold the cutter in place.

SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide

Maintenance

138

Summary of Contents for SC-T3100 Series



















































































































































































Search results

Summary of Contents for SC-T3100 Series

Reviews:

Related manuals for SC-T3100 Series

Brands by name

Popular brands

Epson SC-T3100 Series, User Manual

Search results

Summary of Contents for SC-T3100 Series

Reviews:

Related manuals for SC-T3100 Series

Brands by name

Popular brands