Epson SC-T3000, Service Manual

Page: 31 / 314

SC-T7000 series/SC-T5000 series/SC-T3000 series Revision B
PRODUCT DESCRIPTION Control Panel Specifications 31
Confidential
Setup menu Printer Setup
Roll Paper Setup
Roll Paper Margin
Normal
When set to “Normal”, the top and bottom margins are 15 mm, and the left and right
margins are 3 mm.
Except for “15 mm”, the left and right margins for all other settings are 3 mm.
Top 15 mm/
Bottom 15 mm
Top 35 mm/
Bottom 15 mm
Top 45 mm/
Bottom 15 mm
3 mm
15 mm
Roll Paper
Remaining
On Select whether to display/record (“On”) or not to display/record (“Off”) the amount
of remaining roll paper. The following options can be made available by selecting
“On” and entering the length of the roll.
†
Amount of roll paper remaining
When the roll is removed, a barcode will automatically be printed on the roll
stating the length remaining, the value selected for the roll remaining alert, and the
paper type.
The barcode is automatically read and settings adjusted the next time the paper is
used, improving efficiency when multiple rolls of paper are used.
†
Printing Availability
The printer will estimate printing availability based on the length of the roll.
Off
Remaining Alert
1 to 15 m (4 to 50
ft)
Displayed when “On” is selected for “Roll Paper Remaining”.
Set within a range from 1 to 15 m (4 to 50 ft) to display a warning when the amount
of remaining roll paper drops below that limit. You can set in 0.5 m (1 ft) increments.
Advanced Settings
Roll Paper Tension
Low Select “High” or “Extra High” if the paper wrinkles during printing.
“Roll Paper Tension” can be specified separately for each paper type using the
“Custom Paper Setting” option in the Paper menu.
When “Custom Paper” is chosen for “Select Paper Type”, the printer will use the
value selected for “Roll Paper Tension” in the “Custom Paper Setting”.
This setting takes effect if no custom roll paper tension is specified.
Normal
High
Extra High
Less Head Scuffing
On If the paper is thick, the print head may scuff the print surface. Choose “On” to
prevent scuffing. This option can be used to temporarily change the value selected for
“Custom Paper Setting” > “Platen Gap” in the Paper menu. Note, however, that “On”
has no effect when “Wider” is selected for “Platen Gap”.
Off
Table 1-8. Menu List
Menu Menu Item / Setting Value (Shaded one is the default) Explanation