Epson SC-F9200 series User Manual Download Page 3

Page: 3 / 144

Contents

Manual Types and Usage. . . . . . . . . . . . . . . . . . . . 5

Manual  Organization. . . . . . . . . . . . . . . . . . . . .  5
Meaning  of  Symbols. . . . . . . . . . . . . . . . . . . . . .  5
Screenshots. . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
Illustrations. . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
Operating  System  Versions. . . . . . . . . . . . . . . . .  5
Video  Manuals. . . . . . . . . . . . . . . . . . . . . . . . . .  6

Important Safety Instructions. . . . . . . . . . . . . . . . . 6

When choosing a place for this product. . . . . . . . 6
When  setting  up  this  product. . . . . . . . . . . . . . .  6
When  using  this  product. . . . . . . . . . . . . . . . . . .  7
When  handling  the  ink  packs. . . . . . . . . . . . . . .  7

Printer Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Front  section. . . . . . . . . . . . . . . . . . . . . . . . . . .  8
Slider. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12
LAN  port. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12
Inside. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13
Back. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14
Control  panel. . . . . . . . . . . . . . . . . . . . . . . . . .  16
Understanding  the  Display. . . . . . . . . . . . . . . .  17

Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Realizing  High  Productivity. . . . . . . . . . . . . . . .  19
Superior  Ease  of  Use. . . . . . . . . . . . . . . . . . . . .  19
High  Print  Quality. . . . . . . . . . . . . . . . . . . . . .  19

Notes on Usage and Storage. . . . . . . . . . . . . . . . . . 20

Installation  space. . . . . . . . . . . . . . . . . . . . . . .  20
Notes  when  using  the  printer. . . . . . . . . . . . . . .  20
Notes  when  not  using  the  printer. . . . . . . . . . . .  21
Notes on Handling Ink Packs and Ink Tanks
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  21
Handling  Media. . . . . . . . . . . . . . . . . . . . . . . .  22

Using the Supplied Software. . . . . . . . . . . . . . . . . 23

Contents of the Software Disc. . . . . . . . . . . . . . 23

Uninstalling Software. . . . . . . . . . . . . . . . . . . . . . 24

Using EPSON LFP Remote Panel 2 . . . . . . . . . . . . 24

Starting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Closing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Basic Operations

Loading and Exchanging Media. . . . . . . . . . . . . . . 26

Loading media. . . . . . . . . . . . . . . . . . . . . . . . . 26
Viewing and Changing Media Settings. . . . . . . . 32

Replacing and removing media. . . . . . . . . . . . . 33

Using the Auto Take-up Reel Unit. . . . . . . . . . . . . 35

Media Loading. . . . . . . . . . . . . . . . . . . . . . . . . 35
Removing the Take-up Roll. . . . . . . . . . . . . . . . 41

Before Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Saving Optimal Settings for the Current Media
(Print Media Settings). . . . . . . . . . . . . . . . . . . . . . 43

Parameters Stored in Print Media Setting
Banks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Storing Parameters in Print Media Setting
Banks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Correcting Print Misalignment (Head
Alignment). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Feed Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . 49

Changing settings during printing. . . . . . . . . . . . . 51

Feed Adjustment. . . . . . . . . . . . . . . . . . . . . . . . 51
Heating & Drying. . . . . . . . . . . . . . . . . . . . . . . 52

Printable area. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Maintenance

When to Perform Various Maintenance
Operations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  55
Replacing  and  Refilling  Consumables. . . . . . . . .  56
Other  maintenance. . . . . . . . . . . . . . . . . . . . . .  56

Preparation and Notes. . . . . . . . . . . . . . . . . . . . . . 57

What  You’ll  Need. . . . . . . . . . . . . . . . . . . . . . .  57
Precautions  regarding  maintenance. . . . . . . . . .  57
Moving  the  Print  Head. . . . . . . . . . . . . . . . . . .  58
Using  Ink  Cleaner. . . . . . . . . . . . . . . . . . . . . . .  59

Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Cleaning  Around  the  Print  Head. . . . . . . . . . . .  59
Cleaning Wiper and Attachment Point. . . . . . . . 61
Cleaning  Caps. . . . . . . . . . . . . . . . . . . . . . . . . .  63
Cleaning the Platen, Pressure Rollers, and
Media  Holding  Plates. . . . . . . . . . . . . . . . . . . .  64
Cleaning  the  Front  Cover. . . . . . . . . . . . . . . . .  66
Cleaning  the  Heat  Shield. . . . . . . . . . . . . . . . . .  66

Replacing and Refilling Consumables. . . . . . . . . . . 67

Chip  Unit  Replacement  and  Ink  Refills. . . . . . . .  67
Disposing  of  Waste  Ink. . . . . . . . . . . . . . . . . . .  74
Replacing the Wiper Cleaners and Wipers. . . . . 75
Replacing  the  media  holding  plates. . . . . . . . . .  78

Other maintenance. . . . . . . . . . . . . . . . . . . . . . . . 80

Stirring High Density Black ink. . . . . . . . . . . . . 80
Checking for clogged nozzles. . . . . . . . . . . . . . . 82

SC-F9200 Series User's Guide

Contents

Summary of Contents for SC-F9200 series

















































































































































Search results

Summary of Contents for SC-F9200 series

Reviews:

Related manuals for SC-F9200 series

Brands by name

Popular brands

Epson SC-F9200 series, User Manual

Search results

Summary of Contents for SC-F9200 series

Reviews:

Related manuals for SC-F9200 series

Brands by name

Popular brands