When using this product
❏
Do not block or cover the openings in this product’s
cabinet.
❏
Do not insert objects through the slots. Take care
not to spill liquid on this product.
❏
Do not attempt to service this product yourself.
❏
Unplug this product and refer servicing to qualified
service personnel under the following conditions:
The power cord or plug is damaged; liquid has
entered the product; the product has been dropped
or the cabinet damaged; the product does not
operate normally or exhibits a distinct change in
performance.
❏
Do not move the print heads by hand; otherwise
you may damage this product.
❏
Always turn the product off using the Power button
on the control panel. When this button is pressed,
the Power light flashes briefly then goes off. Do not
unplug the power cord or turn off the product until
the Power light stops flashing.
❏
This device has two power systems. There is a risk of
electric shock unless the two power cables are
unplugged during the maintenance.
When handling the ink packs
❏
Keep ink packs out of the reach of children and do
not drink.
❏
Wear protective eyewear, gloves, and a mask when
performing maintenance.
Should ink contact your skin or enter your eyes or
mouth, immediately take the following actions:
❏
If fluid adheres to your skin, immediately wash
it off using large volumes of soapy water.
Consult a physician if the skin appears irritated
or is discolored.
❏
If fluid enters your eyes, rinse immediately with
water. Failure to observe this precaution could
result in bloodshot eyes or mild inflammation.
❏
If fluid enters your mouth, consult a physician
immediately.
❏
If fluid is swallowed, do not force the person to
vomit, and consult with a physician
immediately. If the person is forced to vomit,
fluid may get caught in the trachea which can
be dangerous.
SC-F9200 Series User's Guide
Introduction
7
