manualshive.com logo in svg

Epson S1C33210, Technical Manual

The Epson S1C33210 Technical Manual is a comprehensive resource for users of this cutting-edge product. With step-by-step instructions and detailed illustrations, this manual provides all the information needed to maximize the capabilities of the S1C33210. Download this manual for free from our website, ensuring hassle-free access anytime, anywhere.

Share
Download
background image

III PERIPHERAL BLOCK: 16-BIT PROGRAMMABLE TIMERS

S1C33210 FUNCTION PART

EPSON

B-III-4-5

• External clock

When using the timer as an event counter by supplying clock pulses from an external source, make sure the
event cycle is at least the CPU operating clock period.

Selecting comparison data register/buffer

The comparison data registers A and B are used to store the data to be compared with the content of the up-
counter. This register can be directly read and written. Furthermore, comparison data can be set via the
comparison register buffer. In this case, the set value is loaded to the comparison data register when the
counter is reset by the comparison match B signal or software (by writing "1" to PRESETx bit).
Select whether comparison data is written to the comparison data register or the buffer using the following
control bits:
Timer 0 comparison register buffer enable: SELCRB0 (D5) / 16-bit timer 0 control register (0x48186)
Timer 1 comparison register buffer enable: SELCRB1 (D5) / 16-bit timer 1 control register (0x4818E)
Timer 2 comparison register buffer enable: SELCRB2 (D5) / 16-bit timer 2 control register (0x48196)
Timer 3 comparison register buffer enable: SELCRB3 (D5) / 16-bit timer 3 control register (0x4819E)
Timer 4 comparison register buffer enable: SELCRB4 (D5) / 16-bit timer 4 control register (0x481A6)
Timer 5 comparison register buffer enable: SELCRB5 (D5) / 16-bit timer 5 control register (0x481AE)

When "1" is written to SELCRBx, the comparison register buffer is selected and when "0" is written, the
comparison data register is selected.
At initial reset, the comparison data register is selected.

Setting comparison data

The programmable timer contains two data comparators that allows the count data to be compared with given
values. The following registers are used to set these values.

Timer 0 comparison data A: CR0A[15:0] (D[F:0]) / 16-bit timer 0 comparison data A set-up register (0x48180)

Timer 0 comparison data B: CR0B[15:0] (D[F:0]) / 16-bit timer 0 comparison data B set-up register (0x48182)

Timer 1 comparison data A: CR1A[15:0] (D[F:0]) / 16-bit timer 1 comparison data A set-up register (0x48188)

Timer 1 comparison data B: CR1B[15:0] (D[F:0]) / 16-bit timer 1 comparison data B set-up register (0x4818A)

Timer 2 comparison data A: CR2A[15:0] (D[F:0]) / 16-bit timer 2 comparison data A set-up register (0x48190)

Timer 2 comparison data B: CR2B[15:0] (D[F:0]) / 16-bit timer 2 comparison data B set-up register (0x48192)

Timer 3 comparison data A: CR3A[15:0] (D[F:0]) / 16-bit timer 3 comparison data A set-up register (0x48198)

Timer 3 comparison data B: CR3B[15:0] (D[F:0]) / 16-bit timer 3 comparison data B set-up register (0x4819A)

Timer 4 comparison data A: CR4A[15:0] (D[F:0]) / 16-bit timer 4 comparison data A set-up register (0x481A0)

Timer 4 comparison data B: CR4B[15:0] (D[F:0]) / 16-bit timer 4 comparison data B set-up register (0x481A2)

Timer 5 comparison data A: CR5A[15:0] (D[F:0]) / 16-bit timer 5 comparison data A set-up register (0x481A8)

Timer 5 comparison data B: CR5B[15:0] (D[F:0]) / 16-bit timer 5 comparison data B set-up register (0x481AA)

When SELCRBx is set to "0", these registers allow direct reading/writing from/to the comparison data register.
When SELCRBx is set to "1", these registers are used to read/write from/to the comparison register buffer. The
content of the buffer is loaded to the comparison data register when the counter is reset.
At initial reset, the comparison data registers/buffers are not initialized.

The programmable timer compares the comparison data register and count data and, when the two values are
equal, generates a comparison match signal. This comparison match signal controls the clock output (TMx
signal) to external devices, in addition to generating an interrupt.
The comparison data B is also used to reset the counter.

Summary of Contents for S1C33210
















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for S1C33210

NEC IE-78K0-NS-P04 User Manual preview
IE-78K0-NS-P04
Brand: NEC Pages: 72
NEC ELECTRA ELITE IPK II Programming Manual preview
ELECTRA ELITE IPK II
Brand: NEC Pages: 617
NEC VERSA DOCK - SERVICE Installation Manual preview
VERSA DOCK - SERVICE
Brand: NEC Pages: 8
ETAS FETK-S2.1 User Manual preview
FETK-S2.1
Brand: ETAS Pages: 69
Tektronix CTS 850 User Manual preview
CTS 850
Brand: Tektronix Pages: 178
National Instruments NI-9206 Getting Started preview
NI-9206
Brand: National Instruments Pages: 8
Patton electronics Model 2711 User Manual preview
Model 2711
Brand: Patton electronics Pages: 13
RANA Systems RanaSystems 13-0010--001 User Manual preview
RanaSystems 13-0010--001
Brand: RANA Systems Pages: 328
SYNTEK STA-UI-A0035 User Manual preview
STA-UI-A0035
Brand: SYNTEK Pages: 41
DCB BROADCAST POLLING FRAD BPF-14 BU Manual preview
BROADCAST POLLING FRAD BPF-14 BU
Brand: DCB Pages: 28
Keysight Technologies U3024AH10 User'S And Service Manual preview
U3024AH10
Brand: Keysight Technologies Pages: 106
Echelon i.LON SmartServer Hardware Manual preview
i.LON SmartServer
Brand: Echelon Pages: 34
McIntosh MX160 Owner'S Manual preview
MX160
Brand: McIntosh Pages: 44
UMAX Technologies SuperMac E100 User Manual preview
SuperMac E100
Brand: UMAX Technologies Pages: 27
Aleratec 260206 Quick Start Manual preview
260206
Brand: Aleratec Pages: 16
Cooler Master MCY-C3P1-KWNN Manual preview
MCY-C3P1-KWNN
Brand: Cooler Master Pages: 4
Robotis OpenCM 485 Manual preview
OpenCM 485
Brand: Robotis Pages: 10
Vecow SPC-3000 User Manual preview
SPC-3000
Brand: Vecow Pages: 146

Brands by name

Popular brands

Load more brands