manualshive.com logo in svg

Epson S1C33210, Technical Manual, Page: 26 / 559

Share
Download
Epson S1C33210 Technical Manual Download Page 26

2  POWER SUPPLY

A-12

EPSON

S1C33210 PRODUCT PART

2.3 Power Supply for Analog Circuits (AV

DD

)

The analog power supply pin (AV

DD

) is provided separately from the V

DD

 and V

DD

 pins in order that the digital

circuits do not affect the analog circuit (A/D converter). The AV

DD

 pin is used to supply an analog power voltage and

the V

SS

 pin is used as the analog ground.

Supply the same voltage level as the V

DD

 to the AV

DD

 pin.

AV

DD

 = V

DD

, V

SS

 = GND

Note:  Be sure to supply V

DD

 to the AV

DD

 pin even if the analog circuit is not used.

Noise on the analog power lines decrease the A/D converting precision, so use a stabilized power supply and make
the board pattern with consideration given to that.

Summary of Contents for S1C33210
















































































































































































































































































































































































































































































































































































Reviews:

No comments