Epson PowerLite Pro G5900, User Manual

Page: 70 / 140

70
Fine-Tuning the Projector
■ Input Signal
If the colors don’t look right on the
Auto
setting, select the
setting for the type of equipment you’ve connected to the
Computer1
,
Computer2
, or
BNC
ports. Choose
RGB
for a
computer or RGB-video connection, and
Component
for a
video player that outputs a component video signal (with
connectors labeled Y/Cb/Cr or Y/Pb/Pr).
■ Video Signal
Select the setting for the type of equipment you’ve connected
to the
Video1
,
Video2
, or
S-Video
ports. Leave this setting
at
Auto
unless you are using a 60-Hz PAL system (then select
PAL60
).
■ Aspect
Sets the image’s aspect ratio (ratio of width to height).
Depending on your projector model and input source, you
can select
Auto
,
Normal
,
4:3
,
16:9
,
Full
,
Zoom
, or
Native
;
see page 39 for more information.
■ Overscan
Allows you to reduce the image size slightly when the edges of
the image are not visible. The range of trimming can be set to
Off
,
4%
, or
8%
. You can select
Auto
only when the input
source is
HDMI
. When
Auto
is selected, the range is
automatically switched to
Off
or
8%
according to the input
signal.