Epson PowerLite Pro G5900, User Manual

Page: 50 / 140

50
Presenting With the Remote Control
Checking the Projector ID
You can check the projector’s ID by following these steps:
1. Move the remote control ID switch to the
On
position.
2. Point the remote control at the projector you want to check.
3. While holding the
ID
button, press the
Help
button. You see a
message on the screen like this:
Setting the Remote Control ID
The remote control’s default ID is zero. This lets you operate any
projector. To set it to operate a specific projector, follow these steps:
1. Move the remote control ID switch to the
On
position.
note
When the remote control ID
switch is in the
Off
position,
you can control any
projector regardless of the
projector or remote control
ID settings.