Connecting to a Computer for USB Mouse Control
Connecting to a Computer for Sound
Parent topic:
Projector Connections
Connecting to a Computer for USB Video and Audio
If your computer meets the system requirements, you can send video and audio output to the projector
through the computer's USB port (preferably USB 2.0). Connect the projector to your computer using a
USB cable.
1.
Turn on your computer.
2.
Connect the cable to your projector's
USB-B
port.
3.
Connect the other end to any available USB port on your computer.
4.
To use USB Display, do one of the following:
•
Windows 8.x
: Click
EPSON_PJ_UD
in the upper right-corner, then select
Run EMP_UDSE.exe
in the dialog box that appears to install the Epson USB Display software.
•
Windows 7/Windows Vista
: Select
Run EMP_UDSE.exe
in the dialog box that appears to install
the Epson USB Display software.
•
Windows XP
: Wait as messages appear on your computer screen and the projector installs the
Epson USB Display software on your computer.
•
Windows 2000
: Select
Computer
,
EPSON_PJ_UD
, and
EMP_UDSE.EXE
to install the Eposn
USB Display software.
•
OS X
: The USB Display setup folder appears on your screen. Select
USB Display Installer
and
follow the on-screen instructions to install the Epson USB Display software.
Follow any on-screen instructions. You need to install this software only the first time you connect
the projector to the computer.
31
Summary of Contents for PowerLite 570
