REV.-A
Table 6-2. Lubrication Points (Refer to Figure 6-2)
NOTE: Lubrication is necessary in the process of assembly.
Ref. No.
Lubrication Points
(1)
Carriage guide shaft. (On the both left and right sides of
o-2
carriage.)
(2)
Carriage guide plate. (Contact portion with the carriage. 50 mm
G-27
(L) X 2 mm (W))
(3)
Platen gear. (Quarter of gears circle.)
G-27
(4)
Shafts that sets the ribbon gears.
G-27
(5)
Gear portions of the ribbon gears.
G-27
(6)
Felt ring (inside of the carriage)
o-2
Table 6-3. Adhesive Application Point (Refer to Figure 6-l.)
Adhesive Application Point
No. of Point
Engaging part between timing belt and carriage.
1
<To Timing
Fig. 6-1. Correct Adhesive Application
6-2
