35
6.
Enter your wireless password (or network name and then password).
• To enter characters, press the buttons on the numeric keypad.
• To change the character case or type, select
A1#
or press the
reset button.
• To move the cursor to the right or add a space, press the right arrow button.
• To move the cursor to the left, press the left arrow button.
• To enter symbols, press
1
on the numeric keypad.
• To delete the previous character, select
.
• When you finish entering characters, select
OK
and press the
OK
button.
7.
If you want to print a network setup report, press the
start button. (Otherwise, press the
stop
button.)
Your product should now display a blue
Wi-Fi icon on the LCD screen.
Note:
If the
Wi-Fi icon is not displayed on the LCD screen as shown above, you may have
selected the wrong network name or entered the password incorrectly. Repeat these steps to try
again.
Parent topic:
Wi-Fi Infrastructure Mode Setup
Related references
Summary of Contents for L3260 Series
