128
Removing a Memory Card
After you finish working with a memory card, check to make sure it is safe to remove it from your product.
Caution:
Do not remove a memory card or turn off your product while the memory card access light is
flashing or you may lose data from the memory card.
1.
Make sure the memory card access light is not flashing.
2.
If your product is connected to your computer using a USB cable, do one of the following:
•
Windows
: Open the
My Computer
,
Computer
,
Windows Explorer
, or
File Explorer
utility.
Then right-click the name of your memory card (listed as a removable disk) and select
Eject
.
•
Mac
: Drag the removable disk icon for your memory card from the desktop or computer window
into the trash.
3.
Push in the memory card, then pull it straight out of its slot as shown above.
Parent topic:
Printing from a Memory Card
See these sections to print photos from a memory card inserted into your product:
Viewing and Printing Photos From the LCD Screen
Print Setting Options - Memory Card
Parent topic:
Summary of Contents for ET-2750 series
